http://nw-built.com/forum/ Sun, 20 May 2012 04:34:07 +0000 MyBB http://nw-built.com/forum/thread-2904.html Sat, 19 May 2012 11:40:10 -0700 http://nw-built.com/forum/thread-2904.html
mark
206-707-6491
southseattle/skyway (close to roman casino & lucky dragon casino)
]]>
mark
206-707-6491
southseattle/skyway (close to roman casino & lucky dragon casino)
]]> http://nw-built.com/forum/thread-2903.html Fri, 18 May 2012 17:52:11 -0700 http://nw-built.com/forum/thread-2903.html
A few basic things:

1. Make your picture submissions as high DPI/RES as your camera will take. It's much easier for us to make a picture smaller and crop what's unneeded than it is to make a small picture larger. If it's too large to post here without side scrolling, then post a thumb and link it to the bigger picture.

2.When you take your pics, take several from slightly different angles and maybe even several from one spot.

3. Each Member can only submit 3 pictures so choose wisely.

4. Keep your backgrounds distraction free. No trees or poles "growing" out of the roof of the car, no litter in the shot, tire tracks, grease stains, etc.

5.Use a tripod.

6. Play with the ISO and macro settings. Even the cheap point and shoot cameras these days offer these settings to make better pictures. Lower ISO for stationary objects will produce a photo with less noise and much better color quality.

7. You don't have to have the most modded car so don't be afraid to submit a picture.

8. The pictures must be your own. If you have someone take your pictures for you then you need written permission from the photographer. They can also email me letting me know that you have permission to use the picture.(james@nw-built.com)

9. We will take submissions until September, at which time we will go through them, and then put up a vote for you guys to let us know which ones you want to see.

Thank You,
NW-Built Staff]]>
A few basic things:

1. Make your picture submissions as high DPI/RES as your camera will take. It's much easier for us to make a picture smaller and crop what's unneeded than it is to make a small picture larger. If it's too large to post here without side scrolling, then post a thumb and link it to the bigger picture.

2.When you take your pics, take several from slightly different angles and maybe even several from one spot.

3. Each Member can only submit 3 pictures so choose wisely.

4. Keep your backgrounds distraction free. No trees or poles "growing" out of the roof of the car, no litter in the shot, tire tracks, grease stains, etc.

5.Use a tripod.

6. Play with the ISO and macro settings. Even the cheap point and shoot cameras these days offer these settings to make better pictures. Lower ISO for stationary objects will produce a photo with less noise and much better color quality.

7. You don't have to have the most modded car so don't be afraid to submit a picture.

8. The pictures must be your own. If you have someone take your pictures for you then you need written permission from the photographer. They can also email me letting me know that you have permission to use the picture.(james@nw-built.com)

9. We will take submissions until September, at which time we will go through them, and then put up a vote for you guys to let us know which ones you want to see.

Thank You,
NW-Built Staff]]> http://nw-built.com/forum/thread-2902.html Fri, 18 May 2012 12:08:12 -0700 http://nw-built.com/forum/thread-2902.html


'






]]>


'






]]> http://nw-built.com/forum/thread-2899.html Thu, 17 May 2012 22:23:04 -0700 http://nw-built.com/forum/thread-2899.html

So I got myself a 1998 BMW 740IL. Love it. Should have read up more on problems and maintenance first butttt I love the style and just the car so much I don't care. Small upgrades on her when i bought her like dropped on some NEX coil overs, some spacers and HID kit.




Nothing fancy but I will get her to where i want her to be soon enough. And i hated the stock MPARS so i just painted them the other day and will post pics as soon as I can. Feel free to comment.]]>

So I got myself a 1998 BMW 740IL. Love it. Should have read up more on problems and maintenance first butttt I love the style and just the car so much I don't care. Small upgrades on her when i bought her like dropped on some NEX coil overs, some spacers and HID kit.




Nothing fancy but I will get her to where i want her to be soon enough. And i hated the stock MPARS so i just painted them the other day and will post pics as soon as I can. Feel free to comment.]]> http://nw-built.com/forum/thread-2898.html Thu, 17 May 2012 20:54:14 -0700 http://nw-built.com/forum/thread-2898.html
Wheel Size: 14x7
Wheel Offset: +0
Wheel Brand: Enkie 92's
Tire Size: 195/60/14
Number of Wheels/Tires available: 4


Got some silver with machined lip JDM Enkie 92's Mesh with a 3 inch lip. Classic Jdm old school wheel on pretty good tires. Curbed up in some places but are original 92's from back in the day so you should all know how much there worth. But these rims arent my style so im looking to trade for some xxr, rota, or whatever other 17 in wheels ya got.... just please make sure your rims are at least 8 or more inches wide. Also i will trade for stock SE's and $300 Firm.

Anyways text me at 925-209-4754



]]>
Wheel Size: 14x7
Wheel Offset: +0
Wheel Brand: Enkie 92's
Tire Size: 195/60/14
Number of Wheels/Tires available: 4


Got some silver with machined lip JDM Enkie 92's Mesh with a 3 inch lip. Classic Jdm old school wheel on pretty good tires. Curbed up in some places but are original 92's from back in the day so you should all know how much there worth. But these rims arent my style so im looking to trade for some xxr, rota, or whatever other 17 in wheels ya got.... just please make sure your rims are at least 8 or more inches wide. Also i will trade for stock SE's and $300 Firm.

Anyways text me at 925-209-4754



]]> http://nw-built.com/forum/thread-2897.html Wed, 16 May 2012 11:09:16 -0700 http://nw-built.com/forum/thread-2897.html

*Maintenance Was Done 4/30/12 w/ Synthetic Oil
*New Axles (Lifetime Warranty)
*New Brake Pads

Basics:

1998 Honda Civic LX
140k Miles (It will go up, since its my DD)
*Clean Title, 3rd Owner
Power Steering
Power Windows
Power Locks
Cruise Control
A/C (Blows Ice Cold)

Footwork:

Si's on Nitto Neogens 205/50's
Koni Yellow Sports
H&R Springs
Blox LCA's
Blox Extended Lug Nuts

Interior:

Stock Tan Interior 8/10
Alpine FR/R Speakers
Panasonic MP3/Aux Deck

Exterior:

OEM Mud Guards
OEM CTR Front Lip (Not Installed)

Cons: Clear coat peeling on roof and a little bit on the trunk (Common On Sedans)


Priced to Sell: $4500 OBO

206915FIVE49THREE
^Best way to reach me, as i don't go on here much

]]>

*Maintenance Was Done 4/30/12 w/ Synthetic Oil
*New Axles (Lifetime Warranty)
*New Brake Pads

Basics:

1998 Honda Civic LX
140k Miles (It will go up, since its my DD)
*Clean Title, 3rd Owner
Power Steering
Power Windows
Power Locks
Cruise Control
A/C (Blows Ice Cold)

Footwork:

Si's on Nitto Neogens 205/50's
Koni Yellow Sports
H&R Springs
Blox LCA's
Blox Extended Lug Nuts

Interior:

Stock Tan Interior 8/10
Alpine FR/R Speakers
Panasonic MP3/Aux Deck

Exterior:

OEM Mud Guards
OEM CTR Front Lip (Not Installed)

Cons: Clear coat peeling on roof and a little bit on the trunk (Common On Sedans)


Priced to Sell: $4500 OBO

206915FIVE49THREE
^Best way to reach me, as i don't go on here much

]]> http://nw-built.com/forum/thread-2896.html Tue, 15 May 2012 19:44:14 -0700 http://nw-built.com/forum/thread-2896.html http://nw-built.com/forum/thread-2895.html Tue, 15 May 2012 17:55:58 -0700 http://nw-built.com/forum/thread-2895.html
]]>
]]> http://nw-built.com/forum/thread-2894.html Tue, 15 May 2012 08:25:57 -0700 http://nw-built.com/forum/thread-2894.html DriftCrown and ThatsSiiick.com presents
The Spot: Show&Shine and Drift Competion RD3.0

FOR PICTURES OF THE PREVIOUS EVENT, Visit http://www.ThatsSiiick.com keyword search "driftcrown"

... Show&Shine 10am - 2pm
Drifting 10am - 4:40pm
(on track drifting starts around 11-12ish)

Car Show
Event dates: May 19 / July 14 / August 11

Drifting will be: May 18, 19, and 20th
so come out and watch the competion
and on the 19th show off your ride!!!

Location:
Portland International Raceway
1940 North Victory BLVD
Portland, OR 97217

ThatsSiiick.com and the Super Drift Crown series have teamed up to bring drifting and import based car meets back to Portland International Raceway. We’ll be hosting an actual CAR SHOW in June, with trophies! So stay tuned for details for that. This show and shine is just a chill spot to come hangout and show off your ride. There is a $10 entry fee to enter PIR. This fee covers your entry to the entire facility, so you will be able to enjoy the Show&Shine, Drift Competition and SCCA Road Racing.
(note friday may 18th is free to watch)

All makes and models welcome =)
VIP, DRIFT, MOTORCYCLES, MUSCLE, EURO, IMPORT!! we mean everything! CLEAN THEM UP AND BRING THEM IN!!!


Please respect the grounds of PIR. If you don’t follow the rules, you will be asked to leave.

-No Over Excessive Revving and/or Burnouts
-No Speeding (15mph on the grounds of PIR)
-No Littering
-No fighting

SEND AN INVITE TO YOUR CAR BUDDIES!! Spread the word!

video from last event
http://vimeo.com/41513225





]]> DriftCrown and ThatsSiiick.com presents
The Spot: Show&Shine and Drift Competion RD3.0

FOR PICTURES OF THE PREVIOUS EVENT, Visit http://www.ThatsSiiick.com keyword search "driftcrown"

... Show&Shine 10am - 2pm
Drifting 10am - 4:40pm
(on track drifting starts around 11-12ish)

Car Show
Event dates: May 19 / July 14 / August 11

Drifting will be: May 18, 19, and 20th
so come out and watch the competion
and on the 19th show off your ride!!!

Location:
Portland International Raceway
1940 North Victory BLVD
Portland, OR 97217

ThatsSiiick.com and the Super Drift Crown series have teamed up to bring drifting and import based car meets back to Portland International Raceway. We’ll be hosting an actual CAR SHOW in June, with trophies! So stay tuned for details for that. This show and shine is just a chill spot to come hangout and show off your ride. There is a $10 entry fee to enter PIR. This fee covers your entry to the entire facility, so you will be able to enjoy the Show&Shine, Drift Competition and SCCA Road Racing.
(note friday may 18th is free to watch)

All makes and models welcome =)
VIP, DRIFT, MOTORCYCLES, MUSCLE, EURO, IMPORT!! we mean everything! CLEAN THEM UP AND BRING THEM IN!!!


Please respect the grounds of PIR. If you don’t follow the rules, you will be asked to leave.

-No Over Excessive Revving and/or Burnouts
-No Speeding (15mph on the grounds of PIR)
-No Littering
-No fighting

SEND AN INVITE TO YOUR CAR BUDDIES!! Spread the word!

video from last event
http://vimeo.com/41513225





]]> http://nw-built.com/forum/thread-2893.html Mon, 14 May 2012 22:51:19 -0700 http://nw-built.com/forum/thread-2893.html I hope you hate it.










]]> I hope you hate it.










]]> http://nw-built.com/forum/thread-2892.html Mon, 14 May 2012 21:02:34 -0700 http://nw-built.com/forum/thread-2892.html Gates open @ 0900
Come enjoy the weather, take a tour of the base, see the ships and show off your ride!
Entrance is free.
For more information contact me @ dusten.abell@navy.mil

I will have a printable flyer soon.
If you wish to arrange for a group of cars to park together please contact me at the email address listed and We will work something out.

also, feel free to share this on any local forums.]]> Gates open @ 0900
Come enjoy the weather, take a tour of the base, see the ships and show off your ride!
Entrance is free.
For more information contact me @ dusten.abell@navy.mil

I will have a printable flyer soon.
If you wish to arrange for a group of cars to park together please contact me at the email address listed and We will work something out.

also, feel free to share this on any local forums.]]> http://nw-built.com/forum/thread-2891.html Mon, 14 May 2012 14:55:26 -0700 http://nw-built.com/forum/thread-2891.html

We are inviting all European cars to show this year. IF you not European we invite you come hang , see the vendors and talk to sponsors and have a beer.
WaterWerks NW car show will be completely changing locations and the WaterWerks event this year. This year’s event will be located 1 mile off I-90 in North Bend, WA on 230 acres of lush green polo field grass.

A grass amphitheater that is dug approx. 20ft into the earth and the size of a football field will be the location of our main stage, judging and day long events.

Show parking will be on the polo fields and will be open to all European car manufactures. Non-judged show and shine will also be available as in years past.

Expect nothing but the best for food for 2012 as well. All food vendors will be required to be European style food only. Also on tap will a German beer garden with only German beer imported directly from the fatherland.

LIKE us on Facebook http://www.facebook.com/#!/WaterWerksNorthWest

More information will be added in the future.

WaterWerks 2012 ~ On the green
June 24th, 2012
10065 SE 420th Ave
North Bend, WA 98045

http://waterwerksnw.com/php_html/onthegreen.php
http://www.facebook.com/#!/events/107675902686915/
For sponsorship, please contact us at info@waterwerksnw.com
Also Sat night Auburn VW Annual BBQ - http://www.facebook.com/#!/events/218996408215724/]]>

We are inviting all European cars to show this year. IF you not European we invite you come hang , see the vendors and talk to sponsors and have a beer.
WaterWerks NW car show will be completely changing locations and the WaterWerks event this year. This year’s event will be located 1 mile off I-90 in North Bend, WA on 230 acres of lush green polo field grass.

A grass amphitheater that is dug approx. 20ft into the earth and the size of a football field will be the location of our main stage, judging and day long events.

Show parking will be on the polo fields and will be open to all European car manufactures. Non-judged show and shine will also be available as in years past.

Expect nothing but the best for food for 2012 as well. All food vendors will be required to be European style food only. Also on tap will a German beer garden with only German beer imported directly from the fatherland.

LIKE us on Facebook http://www.facebook.com/#!/WaterWerksNorthWest

More information will be added in the future.

WaterWerks 2012 ~ On the green
June 24th, 2012
10065 SE 420th Ave
North Bend, WA 98045

http://waterwerksnw.com/php_html/onthegreen.php
http://www.facebook.com/#!/events/107675902686915/
For sponsorship, please contact us at info@waterwerksnw.com
Also Sat night Auburn VW Annual BBQ - http://www.facebook.com/#!/events/218996408215724/]]> http://nw-built.com/forum/thread-2890.html Sun, 13 May 2012 20:56:15 -0700 http://nw-built.com/forum/thread-2890.html
Stuck between these two both in 330mm, ones prfd leather, ones regular leather.



or



Also considering the Nardi Rally Sport wheel in suede..

Anybody have experience or thoughts. perforated leather vs regular leather vs suede?

Car is dailyd and has no power steering and sees the track. Becuase of this im hesitant on the suede, but it does look very nice.]]>
Stuck between these two both in 330mm, ones prfd leather, ones regular leather.



or



Also considering the Nardi Rally Sport wheel in suede..

Anybody have experience or thoughts. perforated leather vs regular leather vs suede?

Car is dailyd and has no power steering and sees the track. Becuase of this im hesitant on the suede, but it does look very nice.]]> http://nw-built.com/forum/thread-2889.html Sun, 13 May 2012 19:37:25 -0700 http://nw-built.com/forum/thread-2889.html
15x10 -13 5x114.3 all around (steelies): $350
15x8 +0 5x114.3 all around (steelies): $250

there is more stuff, but i havent sifted through it all yet. i have a big ass turbo, and some other things. so ill update this later. prices may be negotiable, considering how cool i think you are ]]>
15x10 -13 5x114.3 all around (steelies): $350
15x8 +0 5x114.3 all around (steelies): $250

there is more stuff, but i havent sifted through it all yet. i have a big ass turbo, and some other things. so ill update this later. prices may be negotiable, considering how cool i think you are ]]> http://nw-built.com/forum/thread-2888.html Sun, 13 May 2012 18:26:09 -0700 http://nw-built.com/forum/thread-2888.html
so to the point are there any meets in the Snohomish/Monroe/Woodinville area? hell even bothell would work... basically anything off of 522 or hwy 2 lmao]]>
so to the point are there any meets in the Snohomish/Monroe/Woodinville area? hell even bothell would work... basically anything off of 522 or hwy 2 lmao]]> http://nw-built.com/forum/thread-2887.html Sun, 13 May 2012 02:24:26 -0700 http://nw-built.com/forum/thread-2887.html
I gave it a paintjob and some wheels, drove it for a year and then tore into it again. I wanted to fix some body issues, and i had plans for a quick and dirty turbo build. Things snowballed, and here we are today.

Here are some of the bigger mods ive done:

Resealed 4age bluetop
365cc GZE injectors
audi k03 turbo from a vw 1.8t
custom DP/exhaust
hooker aerochamber muffler
walbro 255? fuel pump
trick flow fuel filter
modified fuel supply with -6an lines and fittings
oil filter relocate
MegasquirtIIv3
Ford EDIS ignition
(1/2 of LC1 wideband)

it has a modified aftermarket aw11 front bumper, kaminari sideskirts, and aftermarket rear all blended into also custom 20mm wide quarter panels in back.

honestly, most everything has been custom modified or fabricated. i shouldve tried to use more oem pieces to keep it simple, but everything was so old and dirty/broken.

heres a quick pic...ill be uploading more




I got it started and moving under its own power today.

http://www.youtube.com/watch?v=ux3ueoOExyM]]>
I gave it a paintjob and some wheels, drove it for a year and then tore into it again. I wanted to fix some body issues, and i had plans for a quick and dirty turbo build. Things snowballed, and here we are today.

Here are some of the bigger mods ive done:

Resealed 4age bluetop
365cc GZE injectors
audi k03 turbo from a vw 1.8t
custom DP/exhaust
hooker aerochamber muffler
walbro 255? fuel pump
trick flow fuel filter
modified fuel supply with -6an lines and fittings
oil filter relocate
MegasquirtIIv3
Ford EDIS ignition
(1/2 of LC1 wideband)

it has a modified aftermarket aw11 front bumper, kaminari sideskirts, and aftermarket rear all blended into also custom 20mm wide quarter panels in back.

honestly, most everything has been custom modified or fabricated. i shouldve tried to use more oem pieces to keep it simple, but everything was so old and dirty/broken.

heres a quick pic...ill be uploading more




I got it started and moving under its own power today.

http://www.youtube.com/watch?v=ux3ueoOExyM]]> http://nw-built.com/forum/thread-2886.html Sun, 13 May 2012 01:16:02 -0700 http://nw-built.com/forum/thread-2886.html . More to come much more. Anyway here are some pics enjoy!!! Let me know what you think!













]]> . More to come much more. Anyway here are some pics enjoy!!! Let me know what you think!













]]> http://nw-built.com/forum/thread-2885.html Sun, 13 May 2012 00:34:31 -0700 http://nw-built.com/forum/thread-2885.html Rim specs are 18x8.5 33 18x8 38. Rims have minor nics, no curb rash. Rims are mounted balanced and ready to go on your car. Btw tires have almost 100 percent tread only 700 miles on em. I'll also throw in a set of project kics r26 lugs neo chrome they really pop on these rims, if I get my asking price which is 2400. Price is semi negotiable am open to possible trades let me know what you got. Best way to reach me is by text my name is Chris 360 489 4546







]]> Rim specs are 18x8.5 33 18x8 38. Rims have minor nics, no curb rash. Rims are mounted balanced and ready to go on your car. Btw tires have almost 100 percent tread only 700 miles on em. I'll also throw in a set of project kics r26 lugs neo chrome they really pop on these rims, if I get my asking price which is 2400. Price is semi negotiable am open to possible trades let me know what you got. Best way to reach me is by text my name is Chris 360 489 4546







]]> http://nw-built.com/forum/thread-2884.html Sat, 12 May 2012 22:33:50 -0700 http://nw-built.com/forum/thread-2884.html
Roll out NLT 8am

Show up fueled up. We will not wait for stragglers as I am posting the map. You can play catch up. The route is full of troopers so this will be a cruise, NOT A RACE. We will make a meet up spot on the east side of Monroe to meet with the Northerners if they wish to cruise in with us.

http://g.co/maps/5qg4z]]>
Roll out NLT 8am

Show up fueled up. We will not wait for stragglers as I am posting the map. You can play catch up. The route is full of troopers so this will be a cruise, NOT A RACE. We will make a meet up spot on the east side of Monroe to meet with the Northerners if they wish to cruise in with us.

http://g.co/maps/5qg4z]]> http://nw-built.com/forum/thread-2882.html Sat, 12 May 2012 15:48:49 -0700 http://nw-built.com/forum/thread-2882.html but it also costs alot (about $2k) and I don't have insurance to cover it so I had to borrow the money from my mom so unfortunately I have to sell the wheels to pay her back for the surgery. The lips have a few dings but the tires and adapters have about 30 miles on them

Specs:
- 5x120 +22 offset
- 16x7 fronts 16x8 rears
- 195/40-16 Federal 595 EVO tires
- 5x100->5x120 20mm adapters

Located in Tacoma

509-304-4003

asking $1800

on to the pics, I'll get some pics of the dings tomorrow when I get the wheels taken off


]]> but it also costs alot (about $2k) and I don't have insurance to cover it so I had to borrow the money from my mom so unfortunately I have to sell the wheels to pay her back for the surgery. The lips have a few dings but the tires and adapters have about 30 miles on them

Specs:
- 5x120 +22 offset
- 16x7 fronts 16x8 rears
- 195/40-16 Federal 595 EVO tires
- 5x100->5x120 20mm adapters

Located in Tacoma

509-304-4003

asking $1800

on to the pics, I'll get some pics of the dings tomorrow when I get the wheels taken off


]]>