(01.31.2011 02.35 AM)SRT_TAT Wrote:  I would need a when and where and how much before I commit but if it all lines up I would be down

(01.31.2011 02.59 AM)NW_EM1 Wrote:  

(01.31.2011 02.35 AM)SRT_TAT Wrote:  I would need a when and where and how much before I commit but if it all lines up I would be down

X2 on that lol

(01.31.2011 03.16 AM)OldskoojdmDA9 Wrote:  

(01.31.2011 02.35 AM)SRT_TAT Wrote:  I would need a when and where and how much before I commit but if it all lines up I would be down

x3 on that as well. I'd be down to pay $30 for a dyno sesh, just gotta plan ahead.

It will be in Auburn, and I am going to try and get it down to $30 for 2 or 3 pulls. AFR's will be an additional $10. I need to know how many will be attending before I release a date for this. I need to know if we need one or two days.

(01.31.2011 05.02 AM)The Skipper Wrote:  1. ptperformance, SRT4
2. lilgookiemonsta, Viper
3. skipunk11, MazdaSpeed 3
4. azntaiji, Mazda3 Hatch
5. the skipper, Honda CBR 929rr

Not sure if we can do bikes, I will have to ask.

(01.31.2011 06.17 AM)zach90 Wrote:  Just like it was said above I would like to know when and were before I commit. If you could fit my car on the dyno without having to raise it I'd be down I'm shooting for 100hp lol.

You will have to raise your car, we need at least 3 inches from the frame to rack in order to load the car on the dyno. Normally it wouldn't be like this but its a dyno day, and we need to be able to get the cars off and on the dyno as fast as possible (no jacking to clear the rollers).

If you can get that three inches with out to many problems... we are happy to add you to the list.