mazda 3 sedan interior trim parts wrapped in 3m 1080 gloss black. came out great! the parts are textured so it does show thro the wrap. still super shiny & that's what the owner wanted! Wu! Wraps

audi a4 b6 smoked the clear part of the taillights in oracal 8300 dark gray smoke tint film. also did the amber portion of the headlights too, same stuff. everything came out great! owner is happy with the results. Wu! Wraps

lexus is gloss black grill im 3m 1080. came out grea! i actually pulled the grill off the car, and removed the inner slats to wrap it. got as much coverage as possible. owner is diggin tha look! Wu! Wraps

kia forte sedan matte smoke taillights & 3rd brake light on spoiler. came out great! might be doing some more stuff to this one in the future. owner is diggin tha new look! Wu! Wraps

bored yesterday, decided to do my window trim on my camry! 1998 toyota camry xle v6 matte black window trim using 3m 1080. came out pretty good considering the trim has chips and knicks all over it. also did the rear windsheild frame too. had Jeff from Imperial tint tint up the windows the other week, 18% all around and 50% on front windsheild, got some HID 4300k headlights & foglights too! Wu! Wraps

vespa parts done in 3m 1080 carbon fiber. came out great! also windscreen smoked in oracal 8300, still needs some cure time in this pic. came out great! owner is diggin tha new look! Wu! Wraps

did this mercedes g500 yesterday. they come with a weird molding gel coat sticker on the molding that looks like some silver & black stripes... kinda outdated looking and a lil tacky. so i wrapped over them in 3m 1080 matte black vinyl. came out great! now the moldings look solid and flow better with the car. this was done at Speedware Motorsports in Redmond. Owner is diggin it! will prob be doing the brushed aluminum spare tire cover in matte black too, soon! Wu! Wraps

homies lil bro just picked up this lexus is-F. i did the rear diffuser area/ rear bumper accent line area in 3m 1080 matte black to give it that diffuser look. guess this is pretty popular amongst the rare is-F owners out there. came out great! would have been even better if i could remove the damn tips without removing the entire rear bumper. owner is diggin tha new look! Wu! Wraps

did this today for tha homie. lexus is-f plastidipped the emblems & the faux exhaust tips. left the "F" emblem to make it pop. came out great! learned more about this product doing this job. couple tricks i found work well are use pinstripe tape at the edges of the round emblems so while peeling it off the pinstripe vinyl kinda cuts it where it might not wanna break really easy. also put some blue tape in the area around the "X" in the lexus badge, easier to peel of a piece of blue tape than to keep plucking at the plastidip in that small area. 3rd use toothpics to kinda pick/pluck at the plastidip to pull it off in those super small areas around "E" & "S" areas if the plastidip breaks there when peeling off. the exhaust tips came out great! matte black exhaust tips look dope! owner is diggin tha new look! i did the window trim, headlights, taillights, foglights etc... on this car a while back. Who's ready for me to plastidip there whole car?... thinking about buying the spray kit and all... Wu! Wraps

sup sup, workin on this all day today. kawasaki ninja full fairing set wrap. owner bought the vinyl from a well known bike skin co. online, http://www.bikeskinz.com, printed on: 3M™ Controltac™ CV3 with Comply™ v3 Adhesive IJ380Cv3 using a 3M™ 8518 gloss laminate. material has air release so it's not too bad to instal however the overlaminate makes the vinyl a bit thicker and a little harder to stretch. all is going well, i'm 8hrs into this job and have the tank left to go & trimming out all holes and such. prob got another 2-3hrs into this job. lining up the design is not the easiest thing in the world... but the designer did make lots of extra excess so you don't need to worry about coming up short somewhere. but i did have to piece together the front nose out of some scraps and such. Wu! Wraps

so finished up the bike and the owner got it put back together! came out great! crazy how the bike was red b4. owner is diggin tha new look! Wu! Wraps

(07.05.2012 03.55 PM)Wu! Wraps Wrote:  

Cranium! Hahah I haven't played that game in forever. Clean work man.

2006 ford mustang 3m 1080 carbon fiber interior accents. did the steering wheel trim & shifter since they were pretty scratched up and starting to peel. since i had to take apart almost the entire center console to plug the overdrive wire back in PIA, we decided to do the radio and control bezel. i think it was a great call on that one! at least pulling the steering wheel trim pieces was pretty easy. owner is diggin tha new look! Wu! Wraps

2012 honda accord coupe 3m 1080 gloss black roof & antenna, 3m 1080 carbon fiber mirror caps. came out great! mirror caps were removed to get maximum coverage & fold over with lots of 3m primer at the backside. antenna was removed along with the roof finishers (super tight fit, gotta be carefull removing these). for maximum coverage along the edges. came out excellent! owner is diggin tha new look, might be doing some more stuff to this one in the near future. Wu! Wraps

did this one the morning of stancewars & this car was in the show in the evening. mitsu evo9 trunk (can't remember what brand/style this was) in oracal 970ra matte black (more of a satin tho). i wrapped the roof a while back in the same stuff. came out great! this trunk was done in 2 pieces, 1st the back vertical area, then the top flat area with a overlap below the roll area. all using knifeless tape. the trunk was primered with some imperfections so we decided to wrap. owner is very happy with the outcome. Wu! Wraps

scion xa smoke taillights & mirror blinkers in oracal 8300 dark gray smoke film. came out great! i was able to get deep around the edge of the taillights into the area you would see if you open the rear hatch. owner is very happy with the results! Wu! Wraps

porsche cayenne i worked on today. lots of stuff on this one, matte black window trim in 3m 1080, gloss black rear trim under rear windsheild, b &c pillars in 3m 1080, dark smoke taillights & front daytime running lights on front bumper in oracal 8300 dark gray tint film. this job took me 5.5hrs or so. lots of work! owner is diggin tha new look! Wu! Wraps






'