+- nw-built (http://nw-built.com/forum)
+-- Forum: Events/GTG's (/forumdisplay.php?fid=28)
+--- Forum: Meets/Events (/forumdisplay.php?fid=29)
+---- Forum: Past Western WA Events (/forumdisplay.php?fid=60)
+---- Thread:
South End Fender Rolling Party - Dec. 12th - insomniawesome - 12.05.2010 11.40 PM
Marty (skipunk11) is hosting a fender rolling party at his place this coming Sunday! It will be taking place outdoors rain or shine, so if anyone has a canopy please pm an admin so we can get that set up.
There will be two roller and some heat guns so we can do two cars at a time. Pictures will be taken and good times will be had. Maybe people will even chip in for pizza or something. If you plan on attending please post so that we can get an idea of how many people to plan for.
Time:
12PM
Address:
16501 42nd Ave Ct East,
Tacoma, WA 98446
When arriving and leaving please be courteous. No revving engines or speeding in or out of the area. If you act like an asshole, you will be asked to leave. Also, there may be members of another forum there, please be respectful to them as well. We don't want people to think NWB is a bunch of douchers.
RE: South End Fender Rolling Party - Dec. 12th - Im Special - 12.05.2010 11.52 PM
Me and Drew (swirlfx) will be doing work with a pair of Eastwood's!
RE: South End Fender Rolling Party - Dec. 12th - Sarom_ps13 - 12.06.2010 04.55 PM
You guys have a fender rolling tool? or just using baseball bats?? LOL
RE: South End Fender Rolling Party - Dec. 12th - Im Special - 12.06.2010 05.38 PM
Actual tool, baseball bats arnt clean...
RE: South End Fender Rolling Party - Dec. 12th - sbghms - 12.07.2010 07.36 PM
Hmm, this is a possibiltiy since I have some FK's in the mail. I only have the two front fenders which can be rolled and it's only like a 1/4in so idk if it's worth it.
RE: South End Fender Rolling Party - Dec. 12th - SkiPunk11 - 12.07.2010 08.36 PM
(12.07.2010 07.36 PM)sbghms Wrote: Hmm, this is a possibiltiy since I have some FK's in the mail. I only have the two front fenders which can be rolled and it's only like a 1/4in so idk if it's worth it.
mostly Mazdas that need to be rolled on this day and we only need to roll the rear. If you have new wheels or plan on getting balla status later in life its not a bad thing to do. Plus its cheap!!
RE: South End Fender Rolling Party - Dec. 12th - 2NDchnceCELI - 12.10.2010 11.47 PM
dang this sucks!! this is on my daughters birthday!
i wish i could go to roll the fronts i just did DIY hammer/mallot rears. anyone know where i could pick up some 10mm spacers for the rear?
RE: South End Fender Rolling Party - Dec. 12th - Heytheremr2 - 12.15.2010 10.48 AM
crap! I wish I knew about this earlier because my fenders are rubbin hella!!!
RE: South End Fender Rolling Party - Dec. 12th - 2NDchnceCELI - 12.22.2010 10.48 AM
who has the rollers? i was wanting to see if someone could help me roll some fenders and ill pay up
RE: South End Fender Rolling Party - Dec. 12th - CeeeJay - 12.22.2010 12.53 PM
pm im_special or swirlfx
RE: South End Fender Rolling Party - Dec. 12th - 2NDchnceCELI - 12.23.2010 01.36 PM
thanks man!