Wu! Wraps work done by me! check it out!

Wu! Wraps work done by me! check it out! - Printable Version

+- nw-built (http://nw-built.com/forum)
+-- Forum: The nw-built Garage (/forumdisplay.php?fid=23)
+--- Forum: Stance, Show, and Visual (/forumdisplay.php?fid=26)
+--- Thread: Wu! Wraps work done by me! check it out! (/showthread.php?tid=2484)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 12.30.2011 10.54 PM

i've done it to some of my electronics, i just don't know if peeps wanna pay for me to do that tho?... i don't like to cut against apple products also is the 2nd reason, the gaps are too small and the knife tends to slip really easily. it's sometimes nice to have the pre-cut templates so you can avoid any type of cutting on the unit.

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 12.30.2011 11.06 PM

SAAB Sonett III 1973 3m 1080 carbon fiber parts Wu! Wraps

sup sup, did these parts today, took some time!.. these are from a 1973 SAAB Sonett III, if i remember right. will be doing some other parts that are part of the body of the car in the future. came out great! the engine cover or "hood" was done in 3 pieces of material. also the mirrors where done in 2 pieces each. will be back in owners hands soon. Wu! Wraps

[Image: webDSCN3885.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 12.30.2011 11.08 PM

[Image: webDSCN3883.jpg]

RE: Wu! Wraps work done by me! check it out! - SkiPunk11 - 12.31.2011 01.54 AM

if I held a gun to your head would you wrap every single little piece I bring to you ?!!??! lol I kid

RE: Wu! Wraps work done by me! check it out! - simply_leXXXual - 12.31.2011 03.23 AM

(12.30.2011 06.40 PM)Wu! Wraps Wrote: simply_leXXXual: i prefer not to wrap stuff like that, you should just buy the pre-cut templates off ebay and DIY.

thanks for the honesty. i will look into it

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.07.2012 04.33 PM

sup sup, did these today, smoked the amber part of the headlight with oracal 8300 dark gray smoke film. came out great! sorry for dull pics, took with phone. owner is very happy with the results! gave him some bmw roundel decals also, Wu! Wraps

[Image: webphoto1-2.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.07.2012 06.27 PM

got some pics from the owner of this audi s4 b7 avant i did a while back in gloss black/piano black using oracal 970ra vinyl. looks great!

[Image: web9-2.jpg]

RE: Wu! Wraps work done by me! check it out! - J0$3 - 01.07.2012 09.20 PM

Looks good..

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.08.2012 11.06 AM

super glossy black vinyl air release for sale 5'x5' $30.00

sup so long story short i bought some chinese vinyl and it wasn't the color i wanted... so i have this 5'x100' roll of glossy black vinyl. it is very nice and glossy and even has a protective layer over it so when you install this it won't scratch up the actual finish of the vinyl. it has air release and looks pretty legit. i will have a hard time using all 100' of this in a timely manner so i am offering it for sale in increments or a full roll. i paid $550.0 for the roll so i'm not really tryin to make anything off of it, just tryin to re-coup some $$ from this deal. so for all you DIY guys this is for you! you can wrap roofs, interior trim parts, chrome trimmings, etc...

get @ me Mark Wu 2067076491
i will NOT ship this stuff, local pickup only.

[Image: webDSCN3921.jpg]

RE: Wu! Wraps work done by me! check it out! - KEVIN.E - 01.08.2012 11.34 AM

whats the technique? I have di noc wood grain vinyl and was trying to do small interior pieces but was having a hard time contouring the vinyl around the curves without distorting or creating pinches/air bubbles in the wrap.

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.09.2012 07.54 PM

KEVIN.E: just depends on the part, you need to sometimes come around the corner 1st b4 going to the flatter areas... also most air bubbles will be pressed out with di-noc since it has air release. pinches you need to avoid, and when all else fails or the corver is a 90 degree drop into a sharp 90 degree bend "like the corner of a box" then you must make a seam there. that's all i can tell you without seeing what your workin with. also just to let you know di-noc is a lot harder to work with than other vinyls since it is more pvc (plastic composite) than vinyl, causing it to be thicker/ less stretchy/ tends to want to shrink back to it's original state. also you should be using 3m primer 94 with all di-noc porducts.

check out my lil tutorial:
http://www.mazdasnw.com/forumdisplay.php?149-Wu!-Wraps

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.10.2012 08.35 PM

bmw e92 335i air scoops wrapped in 3m di-noc ca-421 carbon fiber

sup got my air scoops for my e92, decided to do them in di-noc to match the rest of the engine bay. also slapped a gloss black Wu! Wraps decal on 1 of them. Wu! Wraps

[Image: webDSCN3970.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.10.2012 08.43 PM

GSX-R air ducts 3m 1080 anthracite carbon fiber Wu! Wraps.

sup did these today, air ducts had some pretty bad scratches on them, had to sand them down a bit with 180grit. laid lots of 3m primer 94 around the edges since you can't really wrap under/fold over the edge. overvall came out great! can't even tell there was damage to them. Wu! Wraps

[Image: webDSCN3953.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.10.2012 08.47 PM

mitsubishi evo 9 hood grill vent 3m 1080 carbon fiber

sup sup, did this one this afternoon. this was pretty complex but didn't take too long. had to make each slit and cut out each little circle. then shave a bit off the edges so it's nice and flat. came out great! really subtle mod but detailed. owner is diggin it! Wu! Wraps

[Image: webDSCN3967.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.27.2012 10.33 PM

mercedes w212 e63 AMG 3m 1080 cf interior trim Wu! Wraps

sup sup, did this one at CNC in bellevue today. 2010 mercedes w212 e63 amg interior trim done in 3m 1080 black carbon fiber. was pretty tricky to take the dash trim off the car & driver side air vent. door panel trim parts were wrapped on the car since it wasn't necessary to pull the door trim parts off to get a "good" wrap job done. i also wrapped the front "mercedes" silver door/ floor board trim part in 3m 1080 matte black since he got some illuminated AMG ones. lastly i blacked out the front bumper amber reflector/daytime running light with oracal 970ra gloss black (not pictured) for a cleaner look. overal came out EXCELLENT! think this maybe the 1st w212 interior trim wrapped thus far. owner is very happy with the results! Wu! Wraps

[Image: webDSCN4026.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 01.27.2012 10.34 PM

[Image: webDSCN4013.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 02.04.2012 09.22 PM

bmw e46 m3 smoked corner lense, amber bumper reflector, taillights, yellow foglights, and carbon fiber wrapped grill bezels. smoked stuff with oracal 8300 transparent smoke film, grill bezels done with 3m 1080 black carbon fiber. owner is diggin it, got some other stuff to do once he gets his parts in! Wu! Wraps

[Image: webphoto5-1.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 02.04.2012 09.28 PM

bmw e60 5series gloss black window trim Wu! Wraps.

gloss black window trim using oracal 970ra. came out great! gonna be doing a silver carbon fiber interior trim sometime next month on this one! Wu! Wraps
[Image: webDSCN4049.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 02.04.2012 09.34 PM

bmw e64 6series interior trim wrapped in 3m 1080 carbon fiber.

from a bmw 645ci, this is a trim the owner sent me from NY. also sent me the cup holder & steering wheel trim. came out great! will be back in the mail on Mon. this is the 8/10th job i've done for east coast guys... Wu! Wraps

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps2.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps2.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps3.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps4.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps6.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps8.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps9.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps7.jpg]

[Image: bmwe63645ci3m1080carbonfiberinteriortrimWuWraps1.jpg]

RE: Wu! Wraps work done by me! check it out! - Wu! Wraps - 02.04.2012 09.43 PM

hyundai yf sonata matte black & smoke lights Wu! Wraps.

this one was a 2 day job, took me 10hrs!... 2011 hyundai sonata YF, wrapped allllll the chrome stuff (grill, handles, window trim, trunk trim) in oracal 970ra matte black. also smoked all the lights with oracal 8300 dark gray smoke film. lastly debadged the "sonata" emblem on trunk. owner is super happy with the way the car looks, got it tinted after the pics, and getting lined up from some new rims! Wu! Wraps

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps3.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps3.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps4.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps7.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps5.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps6.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps8.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps1.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...raps10.jpg]

[Image: hyundaisonatayfmatteblackgrilloracal970r...Wraps9.jpg]