+- nw-built (http://nw-built.com/forum)
+-- Forum: Marketplace (/forumdisplay.php?fid=6)
+--- Forum: For Sale (/forumdisplay.php?fid=18)
+---- Forum: General For Sale (/forumdisplay.php?fid=36)
+---- Thread: JL Audio 300/2 v1 (/showthread.php?tid=1732)
JL Audio 300/2 v1 - aznlunatic - 05.09.2011 11.10 PM
Looking to sell my JL Audio 300/2 v1 amp. Its the black edition amp so its not silver. Never had a problem with it, I'm currently using it as a sub amp but its a full range amp so it will work with door speakers. Looking to get $250 obo. Will post pic in the morning.
Specs:
Rated Power: 150 W RMS @ 1.5 ohm-4 ohm x 2 channels (11V-14.5V)
Rated Power (bridged): 300 W RMS x 1 @ 3 ohm-8 ohm(11V-14.5V)
THD at Rated Power: <0.03% @ 4 ohm
S/N Ratio*: >108.5dB below rated power
Frequency Response: 5 Hz - 30 KHz (+0, -1dB)
Damping Factor: >200 @ 4 ohm per. ch./50 Hz
Input Range: switchable from 200mV-2V RMS to 800mV-8V RMS
Dimensions: 13.4"L x 9.25"W x 2.36"H
Differential-Balanced Input Topology: (1 pair of inputs)
On-board Crossover: fully-variable (50Hz-5 KHz), selectable-slope LP or HP (12 or 24 dB per octave)
Preamp Output: 2-channel (full-range, LP or HP)
Speaker output connections: accept up to 8ga. wire
+12V and Ground connections: accept up to 4ga. Wire